Table of Contents
Advertisement
HUAWEI USG9500 Series
Hardware Guide
This chapter describes the specifications of the USG9500 as well as the cables and
environmental requirements for device running.
A.1 Cable
This section describes the PGND cable, power cable, configuration cable, Ethernet cable, and
optical fiber of the USG9500.
A.2 On-site Cable Assembly and Installation
This section describes how to assemble and install power cables, Ethernet cables, and other
cables.
A.3 Environmental Requirements for Device Running
This section describes the environment requirements for device running, including the
requirements for the equipment room environment and power supply conditions.
A.4 Equipment Grounding Specifications
This section describes grounding specifications, including general grounding specifications,
the grounding specifications for equipment rooms, devices, communication power modules,
signal cables, and signal cables, and the specifications for laying out ground cables.
A.5 Engineering Labels for Cables
This section provides an overview of labels and describes the labels for optical fibers,
Ethernet cables, and power cables.
A.6 Requirements for Customers' Cabinets Purchased from Other Vendors
This section describes the requirements on customers' cabinets purchased from other vendors.
A.7 Fault Tag
Issue 03 (2017-12-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
A
Appendix
A Appendix
415
Advertisement
Table of Contents
