Table of Contents
Advertisement
HUAWEI USG9500 Series
Hardware Guide
Name
CF SLOT2
CF ACT indicator
(green)
CF OFL button
Interfaces and indicators
CTL-ETH-SFP interface
(1000MBase-X)
SFP LINK/ACT
indicator (green)
MGMT-ETH interface
(10M/100M/1000M
Base-TX auto-sensing)
MGMT-ETH LINK
indicator (green) (on
Ethernet network
interfaces)
MGMT-ETH ACT
indicator (amber) (on
Ethernet interfaces)
Console interface
AUX interface
Others
USB interface
CLK/TOD0
CLK/TOD1
CLK/1PPS
CLK/Serial
Issue 03 (2017-12-15)
Description
SRUs of the USG9560 have two CF cards numbered CF card 1
and CF card 2.
CF card 1 lies on the circuit board of the SRU and stores
system files and configuration files. CF card 2 lies on the panel
of the SRU and stores logs and alarms.
l On: The CF card is in position.
l Blinking: Data is being read or written.
l Off: The CF card is not in position or can be removed.
If you press the CF OFL button, all operations on the CF card
will be ended, and the CF card will be powered off.
It is reserved for use after capacity expansion.
l Steady on: The link is normal.
l Blinking: Data is being transmitted.
It connects to the NMS workstation and has LINK and ACT
indicators.
l Steady on: The link is normal.
l Off: The link is Down.
l Blinking: Data is being transmitted.
l Off: No data is being transmitted.
It connects to the console for on-site configuration of the
system.
It connects to the Modem for remote maintenance through
dialing.
It is not used and reserved.
They are reserved to input or output clock signals.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Hardware Overview
102
Advertisement
Table of Contents
