Table of Contents
Advertisement
HUAWEI USG9500 Series
Hardware Guide
Panel
Figure 1-99
Figure 1-99 P40-2x10GBase LAN/WAN-XFP
P40-2×10GBase LAN/WAN-XFP
P40-2×10GBase LAN/WAN-XFP
Name
STATUS (green)
LINK/ACT (green)
Interface Attributes
Table 1-122
If you configure a 10 GE interface to work in WAN mode, use single-mode optical fibers to
connect devices.
Table 1-122 P40-2x10GBase LAN/WAN-XFP interface attributes
Attributes
Connector type
Optical interface
attributes
Working mode
Frame format
Network protocol
Issue 03 (2017-12-15)
shows the P40-2x10GBase LAN/WAN-XFP.
Description
l Blinks every 2 seconds (0.5 Hz): The system is running
l Blinks twice each second (2 Hz): The system is in the alarm
l Steady on: The link is connected.
l Blinking: Data is being transmitted or received.
l Off: The link is disconnected.
lists the attributes of interfaces on the P40-2x10GBase LAN/WAN-XFP.
NOTICE
Description
LC/PC
Compliant with the selected XFP optical module. For details
about the optional attributes of the optical module, see
Gbit/s XFP Optical
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
normally.
state.
Module.
1 Hardware Overview
1.5.3 10
183
Advertisement
Table of Contents
