Table of Contents
Advertisement
HUAWEI USG9500 Series
Hardware Guide
Component
STATUS (green)
LINK (green)/ACT
(yellow)
Interface Attributes
Table 1-77
Table 1-77 FW-20X1G-RJ45 interface attributes
Attribute
Connector type
Working mode
Cable specifications
Frame format
Network protocol
Technical Specifications
Table 1-78
Table 1-78 Technical specifications of the FW-20X1G-RJ45
Item
Silk-screen board name
Dimensions (width x
depth x height)
Typical power
consumption
Maximum power
consumption
Issue 03 (2017-12-15)
Description
l Blinks every 2 seconds (0.5 Hz): The system is running
normally.
l Blinks twice each second (2 Hz): The system is in the alarm
state.
l Steady on: The link is connected.
l Blinking: Data is being transmitted or received.
l Off: The link is disconnected.
lists the attributes of interfaces on FW-20X1G-RJ45.
Description
RJ45
10M/100M/1000M adaptive, supporting full duplex
When the working mode is 10M or 100M, it is recommended
that Category 5 unshielded twisted pairs be used. When the
working mode is 1000M, it is recommended that super
Category 5 unshielded twisted pairs be used.
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
lists the technical specifications of the FW-20X1G-RJ45.
Specifications
FW-20X1G-RJ45
178 mm x 225 mm x 38 mm
31 W
34.1 W
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Hardware Overview
142
Advertisement
Table of Contents
