Table of Contents
Advertisement
HUAWEI USG9500 Series
Hardware Guide
Panel
Figure 1-102
Figure 1-102 12x10/100/1000Base-TX-RJ45
Name
STATUS (green)
LINK (green)/ACT
(yellow)
Interface Attributes
Table 1-127
Table 1-127 12x10/100/1000Base-TX-RJ45 interface attributes
Attribute
Connector type
Working mode
Cable specifications
Compliance
Frame format
Network protocol
Technical Specifications
Table 1-128
Issue 03 (2017-12-15)
shows the 12x10/100/1000Base-TX-RJ45.
Description
l Blinks every 2 seconds (0.5 Hz): The system is running
normally.
l Blinks twice each second (2 Hz): The system is in the alarm
state.
l Steady on: The link is connected.
l Blinking: Data is transmitted or received.
l Off: The link is disconnected.
lists the attributes of interfaces on the 12x10/100/1000Base-TX-RJ45.
Description
RJ45
10M/100M/1000M adaptive, supporting full duplex
When the working mode is 10M or 100M, it is recommended
that Category 5 unshielded twisted pairs be used. When the
working mode is 1000M, it is recommended that super
Category 5 unshielded twisted pairs be used.
IEEE802.3-2002
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
lists the technical specifications of the 12x10/100/1000Base-TX-RJ45.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Hardware Overview
188
Advertisement
Table of Contents
