Huawei USG9500 Series Hardware Manual page 455

HUAWEI USG9500 Series
Hardware Guide
Table A-22 Common optical fiber types
Type
LC/PC-LC/PC
LC/PC-SC/PC
LC/PC-FC/PC
Precautions
When using optical modules and optical fibers, pay attention to the following to ensure proper
communication between devices:
l
l
l
l
To avoid eye injuries, do not look straight at the optical transmit interface of the laser or the
optical connector.
Technical Specifications
Table A-23
Select optical fibers as required.
Table A-23 Technical specifications of the optical fiber
Item
Transmission mode
Connector
Outer diameter
Length
Issue 03 (2017-12-15)
Transmission
Mode
Single-mode/
Multi-mode
Use single-mode and multi-mode optical fibers as required.
Tx (sending) of the local device corresponds to Rx (receiving) of the peer device.
The wavelengths of the optical modules on both ends must be the same.
Do not overbend optical fibers. The bend radius must not be shorter than 40 mm.
CAUTION
lists the technical specifications of the optical fiber and is for reference only.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Connector
On the USG9500
LC/PC
Specifications
Single-mode/Multi-mode
l On the USG9500: LC/PC
l On the peer device: LC/PC, SC/PC, or FC/PC
2 mm
5 m, 10 m, or 20 m
A Appendix
On the peer device
LC/PC
SC/PC
FC/PC
443