Huawei USG9500 Series Hardware Manual page 379

HUAWEI USG9500 Series
Hardware Guide
Step 6 Check the running status of the inserted SPU.
1.
2.
Issue 03 (2017-12-15)
Figure 3-15 Inserting an SPU
Run the display device command on the standby FW to query the running status of the
SPU motherboard. The SPU motherboard is running properly if all items on the SPU
motherboard in the corresponding slot are displayed as follows:
HRP_S<sysname> display device
USG9520's Device status:
Slot # Type Online
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 SPU Present
2 SPU Present
3 LPU Present
4 MPU Present
6 CLK Present
8 PWR Present
9 PWR Present
10 FAN Present
Run the display device pic-status command on the standby FW to query the running
status of the subcard. The subcard is running properly if all items on the corresponding
subcard are displayed as follows:
HRP_S<sysname> display device pic-status
Pic-status information in Chassis
1:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-
SLOT PIC Status Type
down Registered Cpu
1 0 Registered SPU_CARD_TYPE_IPS
SUCCESS CPU1
1 1 Registered SPU_CARD_TYPE_SPCC
SUCCESS CPU3
2 1 Registered SPU_CARD_TYPE_SPCH
SUCCESS CPU2,CPU3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Register Status
Registered Normal
Registered Normal
Registered Normal
NA Normal
Registered Normal
Registered Normal
Registered Abnormal
Registered Normal
Port_count Init_result
0
0
0
3 Hardware Maintenance
Primary
NA
NA
NA
Master
Master
NA
NA
NA
Logic
SUCCESS
SUCCESS
SUCCESS
367