Firewall Performance Expansion Card (Spca-20-O-H&M) - Huawei USG9500 Series Hardware Manual

HUAWEI USG9500 Series
Hardware Guide
1.4.4.11 Firewall Performance Expansion Card (SPCA-20-O-H&M)
The SPCA-20-O-H&M is a single-CPU service sub-card of the firewall service board, can be
inserted into an SPU slot, and is hot-swappable.
Panel
Figure 1-68
Figure 1-68 SPCA-20-O-H&M
Name
OFL button
OFL indicator
Interface Attributes
The SPCA-20-O-H&M does not have external interfaces.
Technical Specifications
Table 1-70
Table 1-70 Technical specifications of the SPCA-20-O-H&M
Item
Board silkscreen name
Dimensions (width x
depth x height)
Issue 03 (2017-12-15)
shows the SPCA-20-O-H&M.
SPCA-20-O-H&M SPCA-20-O-H&M
Description
To remove a board, press and hold the OFL button for six
seconds until the OFL indicator turns red for one second and
then turns off.
l If the indicator is green and blinks once every second (1
Hz), the board is running normally.
l If the indicator is green and blinks four times every second
(4 Hz), the board is in the alarm state or starting but not
registered.
l If the indicator turns red for one second and then turns off,
you can safely remove the board.
lists the technical specifications of the SPCA-20-O-H&M.
Specifications
SPCF01
SPCA-20-O-H&M
175 mm x 280 mm x 36 mm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Hardware Overview
SPCF01 SPCF01
131