Table of Contents
Advertisement
HUAWEI USG9500 Series
Hardware Guide
Name
SPC
! NOT SWAP
OFL button
OFL indicator
Interface Attributes
The SPU-X8X16-20-O-E8KE does not have external interfaces.
Technical Specifications
Table 1-66
Table 1-66 Technical specifications of the SPU-X8X16-20-O-E8KE
Item
Board silkscreen name
Dimensions (width x
depth x height)
Typical power
consumption
Maximum power
consumption
Typical heat
consumption
Maximum heat
consumption
Board weight
Maximum input voltage
range (DC)
Issue 03 (2017-12-15)
Description
The SPC and SPU share one sales code in a slot. They both
must be replaced at the same time.
To remove an SPC, press and hold the OFL button for six
seconds until the OFL indicator turns red for one second and
then turns off.
l If the indicator is green and blinks once every second (1
Hz), the SPC is running normally.
l If the indicator is green and blinks four times every second
(4 Hz), the SPC is in the alarm state or starting but not
registered.
l If the indicator turns red for one second and then turns off,
you can safely remove the SPC.
lists the technical specifications of the SPU-X8X16-20-O-E8KE.
Specifications
SPUD
SPU-X8X16-20-O-E8KE
400 mm x 520 mm x 41 mm
284 W
311.9 W
969 BTU/hour
1064.2 BTU/hour
6.96 kg
-72 V to -38 V
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Hardware Overview
125
Advertisement
Table of Contents
