Huawei Eudemon8000E Series Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Firewall
  5. Eudemon8000E Series
  6. Manual

Huawei Eudemon8000E Series Manual

Hardware description
Hide thumbs
Table of Contents

Advertisement

Quick Links

HUAWEI Eudemon8000E Firewall
V200R001C01
Hardware Description
Issue
01
Date
2012-11-07
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading

Related Manuals for Huawei Eudemon8000E Series

Summary of Contents for Huawei Eudemon8000E Series

  • Page 1 HUAWEI Eudemon8000E Firewall V200R001C01 Hardware Description Issue Date 2012-11-07 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.

  • Page 3: About This Document

    The symbols used in this document are described in the following table. They are defined as follows. Symbol Description Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 4 Items (keywords or arguments) in brackets [ ] are optional. { x | y | ... } Optional items are grouped in braces and separated by vertical bars. One item is selected. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 5 Press the keys in turn. For example, pressing Alt, A means the two keys should be pressed in turn. Mouse Operation The mouse operations that may be found in this document are defined as follows. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 6 Drag Press and hold the primary mouse button and move the pointer to a certain position. Change History Changes in Issue 01 (2012-11-07) The initial commercial release. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 7: Table Of Contents

    3.2 Components of the E8000E-X8........................37 3.3 Slots Layout and Supported Boards.........................39 3.4 System Configuration............................41 3.5 Physical Specification............................42 3.6 Power Supply System............................43 3.6.1 Features and Distributed Architecture of the Power Supply System............43 Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 8 5.2.2 20-Port 100/1000Base-X-SFP Flexible Card..................92 5.2.3 2-Port 10GBase LAN/WAN-XFP Flexible Card..................95 5.2.4 4-port 10GBase LAN/WAN-XFP FPIC....................98 5.3 LPUF-21 and FPIC............................101 5.3.1 LPUF-21..............................101 5.3.2 1-port 10GBase LAN/WAN-XFP FPIC....................103 5.3.3 12-port 100Base-FX/1000Base-X-SFP FPIC..................106 Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 9 6.7.2 Optical Connectors..........................137 6.7.3 Technical Specifications........................138 A List of Indicators........................140 A.1 Indicators of E8000E-X16..........................141 A.1.1 Fan Module Indicators..........................141 A.1.2 PEM Indicators.............................141 A.1.3 MPUB Indicators..........................141 A.1.4 SFU Indicators............................142 Issue 01 (2012-11-07) Huawei Proprietary and Confidential viii Copyright © Huawei Technologies Co., Ltd.
  • Page 10 C.4 Interface Attributes of 10GBase LAN/WAN-XFP..................156 C.5 Interface Attributes of OC-192c/STM-64c POS-XFP...................157 D Optical Module.........................159 D.1 1 Gbit/s Electrical Transceiver........................160 D.2 1.25 Gbit/s SFP/eSFP Optical Module......................161 D.3 10 Gbit/s XFP Optical Module........................166 Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 11: Product Overview

    The Eudemon8000E completely satisfies the requirements for Electro Magnetic Compatibility (EMC). The overall system achieves module-level shield. Each handle is made of steel sheet to isolate the electromagnetic wave of boards. The Eudemon8000E series includes the following product models: E8000E-X16 E8000E-X8 E8000E-X3 The AC and DC models of the E8000E-X3 are available.

  • Page 12: E8000E-X16 Chassis Overview

    This section describes the appearance, functions, and specifications of the heat dissipation system. 2.8 Switching Network System This section describes the functions of the SFU. 2.9 Control Plane This chapter describes the control plane of the E8000E-X16. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 13: System Overview

    Management Management unit Switching network control unit Forwarding unit Switching network Serial link group (1) The link connects to the managment bus switching unit of another Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 14: Components Of The E8000E-X16

    2.2 Components of the E8000E-X16 This section describes the components of the E8000E-X16. The E8000E-X16 has an integrated chassis, Figure 2-2 shows the architecture and main components of the E8000E-X16. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 15 HUAWEI Eudemon8000E Firewall Hardware Description 2 E8000E-X16 Chassis Overview Figure 2-2 Appearance and main components of the E8000E-X16 Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 16: Slots Layout And Supported Boards

    10. AC power management interface 11. CMU 12. PGND terminal (M6) 2.3 Slots Layout and Supported Boards This section describes slots layout and supported boards of the E8000E-X16. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 17 41 mm (1.6 inches) These slots are used to hold SFUs. Supported Boards Table 2-2 lists the specifications of boards supported by the E8000E-X16. Table 2-2 Supported boards by the E8000E-X16 Type Description Swap MPUB Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 18: System Configuration

    SDRAM capacity of the 2 GB NVRAM capacity of the 4 MB Flash capacity of the MPU 32 MB CF card 2 GB Two 1 GB CF cards. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 19: Physical Specification

    AC input Rated 200 V AC to 240 V AC; 50/60 Hz voltage voltage Maximum 180 V AC to 264 V AC; 50/60 Hz voltage range Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 20: Power Supply System

    As shown in Figure 2-4, the E8000E-X16 backplane is divided into four areas, with each area having two power inputs. These eight power inputs work in backup mode. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 21 The E8000E-X16 can hold eight 70 A Power Entry Modules (PEMs) to provide 4+4 redundancy. Figure 2-5 shows the appearance of the PEM. Figure 2-5 Appearance of the E8000E-X16's PEM Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 22: Dc Power Supply System

    Two -48V power inputs are joined on the board. After the low-frequency filtering, the two -48 V power inputs for fans are joined inside the fan module. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 23: Ac Power Supply System

    After the low-frequency filtering, the two -48 V power inputs for fans are joined inside the fan module. Figure 2-7, each DC power input contains one -48 V power input and one RTN input. Two separated RTN inputs are joined on the board. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 24 AC rectifier module. Figure 2-8 Front view of the AC rectifier module 1. Power running indicator 2. Protection indicator 3. Fault indicator Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 25 Dormant (When the device is in dormant state, the protection indicator of the module is on, but the module does not report alarms.) Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 26: Heat Dissipation System

    The air filters are installed over the air intake vents. Each filter has a curved face, large area, and small windage resistance. These features help to improve heat dissipation efficiency. Air filters on the upper and lower chassis are identical. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 27: Fan Module

    E8000E-X16. Figure 2-10 Air flow in the E8000E-X16 2.7.2 Fan Module This section describes the appearance, technical parameters, and fan speed adjustment of the fan module. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 28 If the indicator is steady on, the fan module, PEM or PFU is faulty. Table 2-10 lists the technical parameters of the fan module. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 29: Air Filter

    The depth of the air filter is the same as that of an SFU and the height of the air filter is four times the width of an SFU as shown in Figure 2-13. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 30: Pfu

    PFU performs functions such as reporting a signal that the PFU is in position, e-label reading and writing, and indicators. Appearance of the PFU Figure 2-14 shows the appearance of the PFU. Figure 2-14 Appearance of the PFU Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 31: Switching Network System

    This section describes the principle of the SFU. The E8000E-X16 has four SFUs. The switching network responsible for switching data between LPUs is a key component of the E8000E-X16. The E8000E-X16 uses switching chips developed by Huawei and Memory- Issue 01 (2012-11-07) Huawei Proprietary and Confidential...

  • Page 32: Sfui-40-B

    This section describes the appearance, panel, and indicators of SFUI-40-B. Appearance As shown in Figure 2-16, the SFUI-40-B on the E8000E-X16 switches data for the entire system. This ensures a non-blocked switching network. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 33 SFUI-40-B SFUI-40-B 1. Ejector lever 2. OFL indicator 3. OFL button 4. RUN indicator 5. ACT indicator Table 2-13 describes the buttons and indicators on the panel. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 34: Control Plane

    E8000E-X16 uses the MPUB and CMU to implement the system control and management functions of the control plane. The functions include route calculation and device management, maintenance, and monitoring. The functions are described as follows: Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 35: Mpub

    This section describes the appearance, panel, and interfaces of the MPUB. Appearance The MPUB is used by the E8000E-X16. Figure 2-18 shows the appearance of the MPUB. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 36 HUAWEI Eudemon8000E Firewall Hardware Description 2 E8000E-X16 Chassis Overview Figure 2-18 Appearance of the MPUB Panel Figure 2-19 shows the appearance of the panel. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 37 18. RUN indicator 19. ACT active/standby 20. MGMT-ETH LINK indicator indicator 21. MGMT-ETH ACT indicator Table 2-15 lists the buttons and indicators on the panel of the MPUB. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 38 MPUB and their uses. Table 2-16 Interfaces on the MPUB and their uses Interface Name Connector Type Description USB interface Not supported. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 39 Category 5 unshielded twisted pair (UTP) cables recommended when the specification interface rate is 10 Mbit/s or 100 Mbit/s; super category 5 Shielded Twisted Pair (STP) cables recommended when the interface rate is 1000 Mbit/s Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 40 9600 bit/s (default value), which can be changed as required Data equipment Data Terminal Equipments (DTE) type Cable 8-core shielded cable specification Technical Specifications Table 2-21 shows the technical specifications of the MPUB. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 41: Cmu

    The CMU can detect the alarms of the ambient temperature and humidity sensors. When detecting an alarm, the device management IC on the CMU sends the alarm to the device. Cabinet door control Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 42 RS-485 port provided by the CMU can work in full duplex mode. Panel Description Figure 2-21 shows the appearance of the panel. Figure 2-21 Panel appearance Table 2-22 lists the functions of the indicators on the CMU panel. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 43 CLOSE1 When an alarm is generated, OPEN is connected to COM and CLOSE OPEN2 is disconnected from COM. COM2 CLOSE2 RE1+ Output for two relays RE1- RE2+ Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 44 Specifications Table 2-24 lists the specifications of the CMU. Table 2-24 Specifications Parameter Value Typical power consumption Heat dissipation 10 British Thermal Units (BTUs)/hour Weight 0.7 kg Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 45: E8000E-X8 Chassis Overview

    3.8 Switching Network This chapter describes the features and functions of a switching network. 3.9 Control Plane This chapter describes the control plane of the E8000E-X8. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 46: System Overview

    Forwarding unit Switching network Serial link group (1) The link connects to the managment bus switching unit of another System Features The E8000E-X8 provides the following system features: Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 47: Components Of The E8000E-X8

    3.2 Components of the E8000E-X8 This section describes the components of the E8000E-X8. The E8000E-X8 has an integrated chassis, Figure 3-2 shows the architecture and main components of the E8000E-X8. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 48 HUAWEI Eudemon8000E Firewall Hardware Description 3 E8000E-X8 Chassis Overview Figure 3-2 Appearance and main components of the E8000E-X8 Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 49: Slots Layout And Supported Boards

    3.3 Slots Layout and Supported Boards This section describes slots layout and supported boards of the E8000E-X8. Slots Layout Figure 3-3 shows the slot layout on the E8000E-X8. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 50 Table 3-2 Supported boards by the E8000E-X8 Type Description Swap SRUA SRU-200-A SFUI-40-C SFUI-200-C SPUA LPUF-40-A LPUF-40-A and FPIC 20-port 100/1000Base-X SFP FPIC 2-port 10GBase LAN/WAN-XFP FPIC 4-Port 10GBase LAN/WAN-XFP FPIC Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 51: System Configuration

    Two 1 GB CF cards Switching capacity 1.44 Tbit/s Interface capacity 240 Gbit/s Three LPUF-40-As (40G) and five (Bidirectional) SPUAs (20G) are configured. Number of LPU slots Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 52: Physical Specification

    200 V AC to 240 V AC; 50/60 Hz voltage voltage Maximum 180 V AC to 264 V AC; 50/60 Hz voltage range System MTBF reliability (year) Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 53: Power Supply System

    As shown in Figure 3-4, the E8000E-X8 backplane is divided into two areas, with each area having two power inputs. These four power inputs work in backup mode. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 54 Table 3-5 Description of the indicators of the PEM Indicator Color Description Green Indicates normal power output. If the indicator is steady on, it implies a normal output. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 55: Dc Power Supply System

    NOTE Figure 3-6, each DC power input contains one -48 V power input and one RTN input. Two separated RTN inputs are joined on the board. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 56: Ac Power Supply System

    NOTE Figure 3-7, each DC power input contains one -48 V power input and one RTN input. Two separated RTN inputs are joined on the board. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 57 AC rectifier module. Figure 3-8 Front view of the AC rectifier module 1. Power running indicator 2. Protection indicator 3. Fault indicator Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 58 Dormant (When the device is in dormant state, the protection indicator of the module is on, but the module does not report alarms.) Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 59: Heat Dissipation System

    An air filter is installed over the air intake vent of the E8000E-X8. The air filter has a curved face, large area, and small windage resistance. These features help to improve heat dissipation efficiency. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 60: Fan Module

    40°C. Figure 3-11 shows the appearance of a fan module. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 61 Dimensions (Width x Depth x Height) 210.4 mm x 100 mm x 243.7 mm Weight 3.4 kg Power consumption (typical value) 30 W Maximum noise 74 dB Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 62: Air Filter

    PFU performs functions such as reporting a signal that the PFU is in position, e-label reading and writing, and indicators. Appearance of the PFU Figure 3-13 shows the appearance of the PFU. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 63 The PFU supports EEPROM extension, allowing you to read and write the e-label. Specifications Table 3-12 shows the specifications of the PFU. Table 3-12 Specifications Parameter Value Typical power consumption Heat dissipation 6.5 BTU/hour Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 64: Switching Network

    The switching network responsible for switching data between LPUs is a key component of the E8000E-X8. The E8000E-X8 uses the switching chips developed by Huawei and Memory- Crossbar-Memory (M-C-M) to provide a three-level switching mode. Level-1 and level-3 switching adopts the shared-memory model and is performed on LPUs; level-2 switching adopts the Crossbar model and is performed on an SFU.

  • Page 65: Sfui-40-C

    3-15, the SFUI-40-C on the E8000E-X8 switches data for the entire system. This ensures a non-blocked switching network. Figure 3-15 Appearance of the SFUI-40-C Panel Figure 3-16 shows the appearance of the panel. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 66 OFL button is pressed to power off the SFUI-40-C, the OFL indicator is on. NOTE The SFUI-40-C can be used only on the E8000E-X8. Technical Specifications Table 3-14 shows the technical specifications of the SFUI-40-C. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 67: Control Plane

    Through the joint test action group (JTAG) bus, the SRUA remotely or locally tests system units, or performs in-service upgrading of system units. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 68: Srua

    SRUA is used by the E8000E-X8. Figure 3-17 shows appearance of the SRUA. Figure 3-17 Appearance of the SRUA Panel Figure 3-18 shows the appearance of the panel. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 69 17. OFL indicator 18. RUN indicator 19. ACT active/standby 20. MGMT-ETH LINK indicator indicator 21. MGMT-ETH ACT indicator Table 3-15 describes the buttons and indicators on the SRUA panel. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 70 ACT indicator If the indicator is off, no data is being transmitted. (amber) (on Ethernet network interfaces) Table 3-16 lists the interfaces on the SRUA and their uses. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 71 Single-mode or multi-mode fibers specification Table 3-18 lists the 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes. Table 3-18 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes Attribute Description Connector type RJ45 Operation mode 10M/100M/1000M auto-sensing interfaces, supporting full-duplex mode Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 72 Electrical RS-232 attribute Baud rate 9600 bit/s (default value), which can be changed as required Data equipment Data Terminal Equipments (DTE) type Cable 8-core shielded cable specification Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 73: Cmu

    In this manner, the CMU can detect the alarms of the fog sensor. When detecting an alarm from the fog sensor, the device management IC on the CMU sends the alarm to the device. Detecting the ambient temperature and humidity Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 74 RS-485 port provided by the CMU can work in full duplex mode. Panel Description Figure 3-20 shows the appearance of the panel. Figure 3-20 Panel appearance Table 3-22 lists the functions of the indicators on the CMU panel. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 75 CLOSE1 When an alarm is generated, OPEN is connected to COM and CLOSE OPEN2 is disconnected from COM. COM2 CLOSE2 RE1+ Output for two relays RE1- RE2+ Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 76 Specifications Table 3-24 lists the specifications of the CMU. Table 3-24 Specifications Parameter Value Typical power consumption Heat dissipation 10 British Thermal Units (BTUs)/hour Weight 0.7 kg Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 77: E8000E-X3 Chassis Overview

    4.7 Heat Dissipation System This section describes the appearance, functions, and specifications of the heat dissipation system. 4.8 Control Plane This chapter describes the control plane of the E8000E-X3. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 78: System Overview

    This section describes the components of the E8000E-X3. The E8000E-X3 has an integrated chassis. Figure 4-1 shows the components of the E8000E- X3 DC chassis. Figure 4-2 shows the components of the AC chassis. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 79 3. LPU cage 4. MPU cage 5. Cabling rack 6. Air intake vent 7. Fan 8. PEM module 9. PGND terminal (M6) 10. Air filter 11. Handle Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 80 4. ESD jack 5. LPU cage 6. MPU cage 7. Cabling rack 8. Air intake vent 9. Fan 10. PGND terminal (M6) 11. Air filter 12. Handle Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 81: Slots Layout And Supported Boards

    Table 4-2 Supported boards by the E8000E-X3 Type Description Swap MPUD SPUA LPUF-40-A and LPUF-40-A FPIC 20-port 100/1000Base-X SFP FPIC 2-port 10GBase LAN/WAN-XFP FPIC 4-Port 10GBase LAN/WAN-XFP FPIC Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 82: System Configuration

    One LPUF-40-A (40G) and two SPUAs (Bidirectional) (20G) are configured. Number of LPU slots Number of MPU slots 4.5 Physical Specifications This section describes the physical parameters of the E8000E-X3. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 83 Ambient Long-term 5% RH to 85% RH, no coagulation relative Short-term 5% RH to 95% RH, no coagulation humidity Storage relative humidity 0% RH to 95% RH Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 84: Power Supply System

    This section describes the appearance, functions and the technical parameters of the DC power supply module. The PEM of the E8000E-X3 is 1 U high, as shown in Figure 4-5. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 85 Surge protection, filtering, and short circuit protection Alarm function Table 4-6 lists the technical parameters of the PEM. Table 4-6 Technical parameters of the DC PEM Item Technical Parameter Type CR52PEMA Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 86: Ac Power Supply Module

    The AC power module of the E8000E-X3 is 1 U high, as shown in Figure 4-6. Figure 4-6 Appearance of the AC power module Table 4-7 describes the indicators on the AC power module. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 87 180 V AC to 264 V AC; 50/60 Hz range Maximum input current 10 A Output voltage -53.3V Maximum output current -53.3V/30A Maximum output power 1600 W Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 88: Heat Dissipation System

    The system draws in air for heat dissipation, as shown in Figure 4-7 Figure 4-8. Figure 4-7 Air flow in the E8000E-X3 DC chassis Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 89: Fan Module

    (FCB), as shown in Figure 4-9. When a single fan fails, the system can still work normally for a short period of time at ambient temperature of 40°C. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 90 Dimensions (width x depth x height) 160 mm x 108 mm x 213 mm Weight 1.5 kg Maximum wind pressure 700 Pa Maximum wind rate 850 m Maximum noise 78 dB Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 91: Air Filter

    Figure 4-10 Air filter on the E8000E-X3 air intake frame NOTE The air filter of the E8000E-X3 can be bent, which facilitates the maintenance within a limited space in the rear of the chassis. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 92: Control Plane

    The two MPUs work in 1:1 backup mode. Each MPU monitors the status of the other. If the master MPU is faulty, the slave MPU automatically takes over as the master MPU. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 93: Mpud

    7. CF card slot (the other CF card slot 8. Reset button is on the circuitry board) 9. OFL button 10. OFL indicator 11. ACT indicator 12. ALM indicator Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 94 If the indicator is blinking, data is being transmitted. (amber) (on If the indicator is off, no data is being transmitted. Ethernet interfaces) Table 4-12 describes the interfaces on the MPUD and their uses. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 95 Twisted Pair (STP) cables recommended when the interface rate is 1000 Mbit/s Table 4-14 lists the console interface attributes. Table 4-14 Console interface attributes Attribute Description Connector type RJ45 Operation mode Duplex Universal Asynchronous Receiver/Transmitter (UART) Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 96 Silkscreen of the board name MPUD Dimensions (W x D x H) 198.5 mm x 551 mm x 40 mm Power consumption (typical value) 41 W Board weight 1.5 kg Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 97: Boards

    (LPUF-40-A, 2 sub-slots) and FPIC. 5.3 LPUF-21 and FPIC This chapter describes the structure and specifications of the Flexible Card Line Processing Unit (LPUF-21, 2 sub-slots) and FPIC. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 98: Spua

    SPUA01 (10G). Figure 5-1 Appearance of the SPUA01 (10G) Panel Figure 5-2 shows the panel of the SPUA01 (10G). Figure 5-2 Panel of the SPUA01 (10G) Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 99 If the indicator blinks twice every 1s (2 Hz), it indicates that the board is in alarm mode. Table 5-2 shows the indicators on the SPC panel. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 100: Lpuf-40-A And Fpic

    The Flexible Card Line Processing Unit LPUF-40-A provides two slots, each of which can hold an FPIC. The LPUF-40-A supports hot swap and supports a maximum of 40-Gbit/s bandwidth. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 101 If the indicator is on, you can remove the board. RUN indicator If the indicator blinks once every 2s (0.5 Hz), the LPU is in the normal (green) state. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 102: 20-Port 100/1000Base-X-Sfp Flexible Card

    Provides GE optical modules, supporting features of GE optical interfaces. Provides FE optical modules, supporting features of FE optical interfaces. Provides electrical interface SFP modules, supporting features of the 10M/100M/1000M auto-sensing electrical interfaces. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 103 Table 5-8 Interface attributes of the 20-port 100/1000Base-X-SFP flexible card Attributes Description Connector type LC/PC Optical interface Compliant with the selected SFP optical module. attributes Working mode Full-duplex Frame format Ethernet_II, Ethernet_SAP, and Ethernet_SNAP Network protocol Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 104 0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -3.0 -9.0 dBm power Optical fiber type Multi- Single- Single- Single- Single- Single- mode mode mode mode mode mode Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 105: 2-Port 10Gbase Lan/Wan-Xfp Flexible Card

    Long-term relative humidity: 5% to 85% Short-term relative humidity: 5% to 95% Storage conditions Storage temperature: -40°C to +70°C Storage humidity: 0% to 95% 5.2.3 2-Port 10GBase LAN/WAN-XFP Flexible Card Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 106 2-port 10GBase LAN/WAN-XFP FPIC. CAUTION If you configure 10 GE interface to work in WAN mode, use single-mode optical fibers to connect devices. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 107 During configuration, the length of optical fibers is restricted by the transmission distance. In addition, the optical fiber with the 50-um core and 2000-MHz*km modal/bandwidth is a special type, which is not delivered by Huawei. If this type of optical fiber is required, you need to purchase it additionally.

  • Page 108: 4-Port 10Gbase Lan/Wan-Xfp Fpic

    4-port 10GBase WAN/LAN-XFP FPIC. Table 5-18 describes the indicators on the panel. Figure 5-8 Panel appearance of the the 4-port 10GBase WAN/LAN-XFP FPIC Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 109 Ethernet_II, Ethernet_SAP, and Ethernet_SNAP Network protocol Table 5-20 Attributes of 10G XFP optical modules Attributes Description Maximum 0.3 km 10 km 40 km 80 km transmission distance Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 110 During configuration, the length of optical fibers is restricted by the transmission distance. In addition, the optical fiber with the 50-um core and 2000-MHz*km modal/bandwidth is a special type, which is not delivered by Huawei. If this type of optical fiber is required, you need to purchase it additionally.

  • Page 111: Lpuf-21 And Fpic

    FPICs. CAUTION The LPUF-21 backplane does not support the hot swap of FPICs. Figure 5-9 shows the appearance of the LPUF-21. Figure 5-9 Appearance of the LPUF-21 Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 112 If the indicator blinks twice every 1s (2 Hz), the system is in alarm mode or the device is starting and not registered. Technical Specifications Table 5-24 shows the technical specifications of the flexible card backplane LPUF-21. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 113: 1-Port 10Gbase Lan/Wan-Xfp Fpic

    Storage humidity: 0% to 95% 5.3.2 1-port 10GBase LAN/WAN-XFP FPIC Panel Appearance Figure 5-11 shows the panel appearance of the 1-port 10GBase LAN/WAN-XFP optical interface FPIC. Table 5-26 shows the indicators. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 114 1-port 10GBase LAN/WAN-XFP optical interface flexible card. CAUTION If you configure 10 GE interface to work in WAN mode, use single-mode optical fibers to connect devices. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 115 The optical fibers whose core diameter is 50 μm and module bandwidth is 2000 Mhz x km are special are not delivered with the product. You can purchase the fibers as required. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 116: 12-Port 100Base-Fx/1000Base-X-Sfp Fpic

    Provide 10 M/100 M/1000 M auto-sensing electrical interfaces through the electrical SFP module. Support intermixing of all modules. Panel Appearance Figure 5-12 shows the panel appearance of the 12-port 100Base-FX/1000Base-X-SFP optical interface FPIC. Table 5-31 shows the indicators. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 117 Table 5-32 Interface attributes of the 12-port 100Base-FX/1000Base-X-SFP FPIC Attribute Description Connector type LC/PC Interface attributes Complies with the selected XFP optical module. Working mode Full-duplex Compliance IEEE 802.3-2002 Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 118 Maximum -2.5 dBm -3.0 dBm 3.0 dBm 1.0 dBm 5.0 dBm 5.0 dBm transmitting optical power Receiving -17.0 -20.0 -22.5 -21.0 -23.0 -30.0 sensitivity Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 119: 12-Port 10Base-T/100Base-Tx/1000Base-T-Rj45 Fpic

    180 mm x 145mm x 40 mm 5.3.4 12-port 10Base-T/100Base-TX/1000Base-T-RJ45 FPIC Panel Appearance Figure 5-13 shows the panel appearance of the 12-port 10Base-T/100Base-TX/1000Base-T- RJ45 FPIC. Table 5-36 shows the indicators. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 120 12-port 10Base-T/100Base-TX/1000Base-T- RJ45 FPIC. Table 5-37 Interface attributes of the 12-port 10Base-T/100Base-TX/1000Base-T-RJ45 FPIC. Attribute Description Connector type RJ45 Working mode 10M/100M/1000M adaptive, supporting full duplex Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 121: 1-Port Oc-192C/Stm-64C Pos-Xfp Fpic

    180 mm x 145 mm x 40 mm x H) 5.3.5 1-port OC-192c/STM-64c POS-XFP FPIC Panel Description Figure 5-14 shows the panel appearance of the 1-port OC-192c/STM-64c POS-XFP FPIC. Table 5-39 shows the indicators. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 122 Complies with the selected XFP optical module. (For the attributes of attributes XFP modules, see Table 5-41.) Working mode Full duplex Compliance STM-64c SDH/OC-192c SONET and RFC 2615 (1619)/1662 Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 123 Table 5-42 Restrictions of the 10G XFP optical module on the transmission distance of various optical fibers. Core diameter (μm) Module Bandwidth (Mhz Transmission Distance x km) 2000 2 to 300 2 to 82 62.5 2 to 33 Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 124: 4-Port 10Gbase Wan/Lan-Xfp Fpic

    4-port 10GBase WAN/LAN-XFP FPIC. Table 5-44 describes the indicators on the panel. Figure 5-15 Panel appearance of the the 4-port 10GBase WAN/LAN-XFP FPIC Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 125 40 km 80 km transmission distance Center 850 nm 1310 nm 1550 nm 1550 nm wavelength Minimum -7.3 dBm -6.0 dBm -1.0 dBm 0 dBm transmitting power Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 126 Table 5-48 Technical specifications of the 4-port 10GBase LAN/WAN-XFP FPIC Item Specifications Silkscreen of the board 4 x 10GBase LAN/WAN-XFP name Power consumption 34 W (typical value) Heat dissipation 110 BTU/hour Board weight 1.5 kg Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 127 HUAWEI Eudemon8000E Firewall Hardware Description 5 Boards Item Specifications Dimensions (width x depth 340 mm x 180 mm x 40 mm x height) Connector type Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 128: Cables

    Ethernet cables are classigied into two types: straight-through cables and crossover cables. 6.7 Optical Fiber This section describes the structure and technical specifications of the optical fiber. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 129: Dc-Input Power Cable

    The terminals on DC cables vary with the devices to which the cables are connected. Two commonly used terminals are OT bare crimping terminal and JG2 double-hole bare crimping terminal. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 130: E8000E-X16 Dc-Input Power Cable

    Table 6-1 Cables used when the power supply distance is shorter than or equal to 15 m Item Description Cable type NEG power Wire,450/750V,60227 IEC 02(RV)16mm ,blue,85A cable (-48 V) Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 131 Table 6-3 Cables used when the power supply distance is longer than 25 m and shorter than or equal to 35 m Item Description Cable type NEG power Wire,450/750V,60227 IEC 02(RV)35mm ,Blue,135A cable (-48 V) Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 132: E8000E-X8 Dc-Input Power Cable

    (-48 V) RTN power Wire,450/750V,60227 IEC 02(RV)16mm ,black,85A cable Terminal E8000E-X8 Naked Crimping Terminal,JG2,16mm ,M6,95A,Tin Plated,for OEM DC Power Naked Crimping Terminal,OT,16mm ,M8,Tin distribution Plating,Naked Ring Terminal cabinet Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 133: E8000E-X3 Dc-Input Power Cable

    Naked Crimping Connector,JG2,34.3mm ,M6(1/4"), 134A,Tin Plated,2AWG,Hole Center Distance 15.875mm (5/8"),Short Tube,for North American DC Power Naked Crimping Terminal,OT,35mm ,M8,Tin distribution Plating,Naked Ring Terminal cabinet 6.1.5 E8000E-X3 DC-Input Power Cable Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 134 Table 6-8 Cables used when the power supply distance is longer than 15 m and shorter than or equal to 35m Item Description Cable type NEG power Wire,450/750V,227 IEC 02(RV)25mm ,blue,110A cable (-48 V) RTN power Wire,450/750V,227 IEC 02(RV)25mm ,black,110A cable Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 135: Ac-Input Power Cable

    Choose external AC cable suite or fixed-length electric and electronic cables as appropriate. Figure 6-5 External AC cable suite Figure 6-6 Fixed-length electric and electronic cable 6.2.2 Structure Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 136: E8000E-X16 Ac-Input Power Cable

    Description Cable Type Monitor and Monitor and Alarm Cable,3m,D9M,CC4P0.48B(S),D9M alarm cable NEG power Wire,450/750V,60227 IEC 02(RV)16mm ,blue,85A cable (-48 V) RTN power Wire,450/750V,60227 IEC 02(RV)16mm ,black,85A cable Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 137: E8000E-X8 Ac-Input Power Cable

    AC-DC convertor and the E8000E-X8 is longer than 3 m, the cabling scheme is shown in E8000E-X8 DC-Input Power Cable. If the distance is shorter than and equal to 3 m, the cabling scheme is shown in Table 6-11. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 138: E8000E-X3 Ac-Input Power Cable

    Table 6-13 Cable type of the AC-input power cable Item Description Cable type External Suite,Power Cords All Over The World,Class I Equipment With Connector C13,External Cable Set Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 139: Grounding Cable

    The terminals on ground cables vary with the devices to which the cables are connected. Two commonly used terminals are OT bare crimping terminal and JG2 double-hole bare crimping terminal. Figure 6-10 OT bare crimping terminal Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 140: Technical Specifications

    6.4.2 Structure Figure 6-12 shows the structure of a console interface cable. Table 6-15 shows the pin assignment on the console interface cable. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 141: Technical Specifications

    Table 6-16 Technical specifications of the console interface cable Item Description Connector X1 Network interface connector-crystal connector -8PIN-8bit-shielded plug Connector X2 Cable connector-D style-25PIN-male Connector X3 Cable connector-D style-9PIN-male Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 142: Auxiliary Port Cable

    Table 6-17 shows the pin assignment on the AUX interface cable. Figure 6-13 AUX interface cable 1. Direction A 2. DB25 male connector 3. Label 4. RJ45 connector Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 143: Technical Specifications

    Symmetrical twisted cable-120-ohm-SEYVPV-0.5mm-24AWG-8core- PANTONE 430U Symmetrical twisted cable-100-ohm-SEYVP-0.48mm-26AWG-8core- black Number of cores 8 Fireproof class Available 15 m for the 120-ohm cable length 3 m for the 100-ohm cable Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 144: Ethernet Cable

    RJ45 connector shown in Figure 6-15. Figure 6-14 Network cable 1. Connector - RJ45 2. Label 1 3. Main label 4. Label 2 Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 145 X2.2 Orange Twisted X1.3 X2.1 White/orange X1.2 X2.6 Green Twisted X1.1 X2.3 White/green X1.4 X2.4 Blue Twisted X1.5 X2.5 White/blue X1.8 X2.8 Brown Twisted X1.7 X2.7 White/brown Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 146: Technical Specifications

    6.7 Optical Fiber This section describes the structure and technical specifications of the optical fiber. 6.7.1 Introduction Table 6-23 lists the types of optical fibers that the Eudemon8000E uses. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 147: Optical Connectors

    LC/PC Optical Connector Figure 6-16 shows the appearance of the LC/PC optical connector. Figure 6-16 LC/PC optical connector Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 148: Technical Specifications

    Rotate the screw cap on the outer ring anti-clockwise when pulling out the fiber. When the screw become loose, pull out the fiber with proper strength. 6.7.3 Technical Specifications Table 6-24 shows the technical specifications of the optical fiber. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 149 Table 6-24 Technical specifications of the optical fiber Item Description Fiber transmission mode Single-mode/Multi-mode Local Connector LC/PC Remote Connector LC/PC, SC/PC and FC/PC Fiber outer diameter 2 mm Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 150: A List Of Indicators

    This chapter presents the indicators of E8000E-X8. A.3 Indicators of E8000E-X3 This chapter presents the indicators of E8000E-X3. A.4 LPU Indicators This chapter presents the indicators of LPU. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 151: Indicators Of E8000E-X16

    The lightning protection link of the PEM failed. l The PEM does not have input power. A.1.3 MPUB Indicators Table A-3 lists the status and descriptions of MPUB indicators. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 152: Sfu Indicators

    If the indicator is blinking, it indicates that data is being indicator (amber) (on transmitted. Ethernet interfaces) If the indicator is off, it indicates that no data is being transmitted. A.1.4 SFU Indicators Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 153: Indicators Of E8000E-X8

    If the indicator is steady on, it indicates that the fan module, PEM or PFU is faulty. A.2.2 PEM Indicators Table A-6 shows the status and meaning of the indicators of the PEM. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 154: Srua Indicators

    If the indicator is blinking, it indicates that data is being read or written. If the indicator is off, it indicates that the CF is not in position or can be removed. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 155: Sfu Indicators

    SFU, the OFL indicator is on. A.3 Indicators of E8000E-X3 This chapter presents the indicators of E8000E-X3. A.3.1 Fan Module Indicators Table A-9 shows the status and description of the indicators. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 156: Power Module Indicators

    If it is blinking, it indicates that the communication is cut off. l If it is steady on, it indicates that faults occur, such as overvoltage or undervoltage of input power or overcurrent. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 157: Mpud Indicators

    If the indicator is steady on, it indicates that the link is normal. (green) (on the If the indicator is off, it indicates that the link is Down. Ethernet interface) Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 158: Lpu Indicators

    If the indicator is off, the link is Down. indicator l If the indicator is on, the link is Up. l If the indicator is blinking, data is being read or written. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 159: B List Of Boards

    HUAWEI Eudemon8000E Firewall Hardware Description B List of Boards List of Boards This chapter presents the list of boards. B.1 Boards B.2 Power Consumption and Weight Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 160: Boards

    4-Port 10GBase LAN/WAN-XFP FPIC LPUF-21 and LPUF-21 FPIC 1-port 10GBase LAN/WAN-XFP FPIC 12-port 100Base-FX/1000Base-X-SFP FPIC 12-port 10Base-T/100Base-TX/1000Base-T- RJ45 FPIC 1-port OC-192c/STM-64c POS-XFP FPIC 4-Por 10GBase LAN/WAN-XFP FPIC Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 161: Power Consumption And Weight

    37 W 120 BTU/ 0.60 kg hour 2-Port 10GBase LAN/WAN-XFP FPIC 12 W 39 BTU/ 0.50 kg hour 4-Port 10GBase LAN/WAN-XFP FPIC 25 W 85.30 0.58 kg BTU/hour Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 162 0.50 kg RJ45 FPIC hour 1-Port OC-192c/STM-64c POS-XFP FPIC 18 W 58 BTU/ 0.50 kg hour 4-Por 10GBase LAN/WAN-XFP FPIC 34 W 110 BTU/ 1.2 kg hour Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 163: C List Of Interface Attributes

    C.1 Interface Attributes of 10Base-T/100Base-TX/1000Base-T-RJ45 C.2 Interface Attributes of 100Base-FX C.3 Interface Attributes of 1000Base-X-SFP C.4 Interface Attributes of 10GBase LAN/WAN-XFP C.5 Interface Attributes of OC-192c/STM-64c POS-XFP Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 164: Interface Attributes Of 10Base-T/100Base-Tx/1000Base-T-Rj45

    Receiving -30.0 dBm -31.0 dBm -37.0 dBm -37.0 dBm sensitivity Overload power -14.0 dBm -8.0 dBm -10.0 dBm -10.0 dBm Optical fiber type Multi-mode Single-mode Single-mode Single-mode Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 165: Interface Attributes Of 1000Base-X-Sfp

    Overload power 0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -3.0 -9.0 dBm Optical fiber type Multi- Single- Single- Single- Single- Single- mode mode mode mode mode mode Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 166: Interface Attributes Of 10Gbase Lan/Wan-Xfp

    Compliant with the selected XFP optical module. (For the attributes of XFP modules, see Table C-7.) Working mode Full-duplex Frame format Ethernet_II, Ethernet_SAP, and Ethernet_SNAP Network protocol Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 167: Interface Attributes Of Oc-192C/Stm-64C Pos-Xfp

    Working mode Full-duplex Link protocol PPP and HDLC Network protocol Table C-9 Attributes of 10G XFP optical modules Attributes Description Transmission 10 km 40 km 80 km distance Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 168 During configuration, the length of optical fibers is restricted by the transmission distance. In addition, the optical fiber with the 50-um core and 2000-MHz*km modal/bandwidth is a special type, which is not delivered by Huawei. If this type of optical fibers are required, you need to purchase it additionally.

  • Page 169: D Optical Module

    D Optical Module Optical Module This chapter presents the optical module. D.1 1 Gbit/s Electrical Transceiver D.2 1.25 Gbit/s SFP/eSFP Optical Module D.3 10 Gbit/s XFP Optical Module Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 170: Gbit/S Electrical Transceiver

    Unit Value Remarks Interface standard 1000BASE-T Transmission rate Mbit/s 10-1000 Complying with IEEE802.3 Interface type RJ-45 Transmission Category 5 UTP, distance BER < 10 , (SFP/ RJ45-GE-100) Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 171: 1.25 Gbit/S Sfp/Esfp Optical Module

    34060360 1000BAS Single- 1550 Preferred SM1550-8 E-ZX mode When performin g a self- loop test, use an optical attenuator Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 172 Maximum root mean square 0.85 (RMS) Spectral Width Maximum spectral width (-20dB) Minimum side mode suppression ratio (SMSR) Average transmit optical power Maximum transmit optical -2.5 power Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 173 Spectral characteristics Maximum root mean square (RMS) Spectral Width Maximum spectral width (-20dB) Minimum side mode suppression ratio (SMSR) Average transmit optical power Maximum transmit optical power Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 174 Maximum root mean square (RMS) Spectral Width Maximum spectral width (-20dB) Minimum side mode suppression ratio (SMSR) Average transmit optical power Maximum transmit optical 0(34060298) power 5(34060207) Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 175 Spectral characteristics Maximum root mean square (RMS) Spectral Width Maximum spectral width (-20dB) Minimum side mode suppression ratio (SMSR) Average transmit optical power Maximum transmit optical power Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 176: 10 Gbit/S Xfp Optical Module

    850 nm, 1310 nm, or 1550 nm and the transmission distance ranges from 0.3 km to 80 Table D-12 lists the currently available 10 Gbit/s XFP optical modules. Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 177 < 1 x 10E Temperature 0-70°C Digital diagnosis XFP MSA INF8077i Environment standard RoHS(exempted) Security standard FCC class B, IEC 60825-1 Class 1 laser eye safe >500V Human body model Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 178 Minimum transmit optical -7.3 power Minimum extinction ratio Optical receiver Operating wavelength range 840-860 Receiver sensitivity < -7.5 Overload power Maximum optical channel cost Maximum reflection factor Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 179 Minimum transmit optical power Minimum extinction ratio Optical receiver Operating wavelength range 1270-1565 Receiver sensitivity < -14.4 Overload power Maximum optical channel cost Maximum reflection factor Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 180 Minimum transmit optical power Minimum extinction ratio Optical receiver Operating wavelength range 1270-1565 Receiver sensitivity < -15 Overload power Maximum optical channel cost Maximum reflection factor Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 181 Minimum transmit optical power Minimum extinction ratio Optical receiver Operating wavelength range 1270-1600 Receiver sensitivity < -24 Overload power Maximum optical channel cost Maximum reflection factor Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 182 40km 10G Fibre Channel XFP-10G- 34060361 l SONET OC-192 / SDH STM-64 ITU-T SM1550-80Km G.959.1 P1L1-2D2 l 10GBASE-ZR/ZW 80km 10G Ethernet l Extended 80km 10G Fibre Channel Issue 01 (2012-11-07) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

This manual is also suitable for:

E8000e-x16E8000e-x8E8000e-x3V200r001c01

Table of Contents