Table of Contents
Advertisement
HUAWEI USG9500 Series
Hardware Guide
1.4.7.5 1-Port 40GBase LAN-CFP FPIC A (E8KE-X-101-1X40GE-CFP)
The E8KE-X-101-1X40GE-CFP occupies one 1/2-width flexible card slot, is compatible with
LPUF-240s, LPUF-120s, and LPUF-101s, works in LAN mode, uses CFP optical modules,
but is not hot-swappable.
Panel
Figure 1-96
Figure 1-96 E8KE-X-101-1X40GE-CFP
Name
STATUS (green)
L/A (green)
Interface Attributes
Table 1-117
Table 1-117 E8KE-X-101-1X40GE-CFP interface attributes
Attribute
Connector type
Optical interface attribute
Working mode
Frame format
Network protocol
Issue 03 (2017-12-15)
shows the E8KE-X-101-1X40GE-CFP.
E8KE-X-101-1X40GE-CFP
E8KE-X-101-1X40GE-CFP
lists the attributes of interfaces on the E8KE-X-101-1X40GE-CFP.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
l Blinks every 2 seconds (0.5 Hz): The system is working
properly.
l Blinks twice each second (2 Hz): The system is in the alarm
state.
l Steady on: The link is connected.
l Blinking: Data is being transmitted or received.
l Off: The link is disconnected.
Description
LC/PC
Compliant with the selected CFP optical module
For details about the optional attributes of the optical module,
see
1.5.5 40 Gbit/s CFP Optical
Full duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
1 Hardware Overview
Modules.
178
Advertisement
Table of Contents
