Huawei USG9500 Series Hardware Manual page 433

HUAWEI USG9500 Series
Hardware Guide
Figure A-7 OT bare crimping terminal
Figure A-8
Figure A-8 JG2 double-hole bare crimping terminal
If the power supply distance is longer than 35 m, you must place the DC power distribution
cabinet closer to the USG9500.
Prepare cables according to the distance between the USG9500and the power distribution
cabinet.
Power Supply Distance Shorter Than 3 m (Cables Between the AC power chassis
and the USG9560)
Place the AC power chassis as close to the device as possible. If the distance is shorter than or
equal to 3 m, use the cabling scheme described in
Table A-5 Cable types and terminals of the AC-input power cable
Item
Cable Type
Issue 03 (2017-12-15)
shows the JG2 double-hole bare crimping terminal without a cable.
NOTICE
Description
NEG
Wire,450/750V,60227 IEC 02(RV)16mm
power
cable (-48
V)
RTN
Wire,450/750V,60227 IEC 02(RV)16mm
power
cable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table A-5.
2
,blue,85A
2
,black,85A
A Appendix
421