Huawei USG9500 Series Hardware Manual page 474

HUAWEI USG9500 Series
Hardware Guide
Figure A-64 Metal contact strips of the same height
Step 2 Hold an RJ45 connector at 45° to better visualize its metal contact strips. Ensure that the top
edges of the metal contact strips are parallel.
with uneven metal contact strips.
Figure A-65 Uneven metal contact strips
Step 3 Check whether the metal contact strips are clean. If they are not clean and cannot be cleaned,
replace the RJ45 connector with a new one.
Figure A-66 Dirty metal contract strip
Step 4 Check whether the metal contact strips and the plastic septa are aligned and intact. If a part is
skewed and it cannot be fixed, replace the RJ45 connector.
connector with askew plastic septa.
Issue 03 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure A-65 shows an unqualified connector
Figure A-66 shows an unqualified connector.
Figure A-67
A Appendix
shows an unqualified
462