Table of Contents
Advertisement
HUAWEI USG9500 Series
Hardware Guide
You can insert the SPC-APPSEC-FW independently in a slot on the motherboard or use it
together with a firewall SPC on the motherboard. The board is hot-swappable.
Panel
Figure 1-70
Figure 1-70 Appearance of the SPC-APPSEC-FW
Name
OFL button
OFL indicator
Interface Attributes
The SPC-APPSEC-FW does not have external interfaces.
Technical Specifications
Table 1-72
Table 1-72 Technical specifications of the SPC-APPSEC-FW
Item
Board silkscreen name
Dimensions (width x
depth x height)
Typical power
consumption
Issue 03 (2017-12-15)
shows the SPC-APPSEC-FW.
SPC-APPSEC-FW
SPC-APPSEC-FW
Description
To remove a board, press and hold the OFL button for six
seconds until the OFL indicator turns red for one second and
then turns off.
l If the indicator is green and blinks once every second (1
Hz), the board is running normally.
l If the indicator is green and blinks four times every second
(4 Hz), the board is in the alarm state or starting but not
registered.
l If the indicator turns red for one second and then turns off,
you can safely remove the board.
lists the technical specifications of the SPC-APPSEC-FW.
Specifications
SPC-APPSEC-FW
175 mm x 280 mm x 36 mm
159 W
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Hardware Overview
134
Advertisement
Table of Contents
