Huawei USG9500 Series Hardware Manual page 360

Hide thumbs Also See for USG9500 Series:

Table of Contents

HUAWEI USG9500 Series

Hardware Guide

Step 6 Check the running status of the new SFU.

Normally, after the new SFU is inserted into the chassis, the SFU automatically communicates

with the boards in the chassis. In this case, you can check the running status of the new SFU

in the following ways:

<sysname> display device

USG9560's Device status:

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Issue 03 (2017-12-15)

Figure 3-6 Inserting a new SFU

Check the RUN indicator on the panel of the SFU. If it is on (green), the SFU is working

Check the alarms. If the system does not generate any alarm related to the new SFU, the

SFU is working normally.

Run the display device command on the console interface. If the SFUs are working

normally, the following is displayed:

Huawei Proprietary and Confidential

3 Hardware Maintenance

Usg9520 Usg9560 Usg9580 V300r001 V500r001