HUAWEI USG9500 Series
Hardware Guide
1.4.5.6 12*10GE SFP+ Daughter Card (FW-12X10G-SFP+)
The FW-12X10G-SFP+ occupies one 1/2-width slot, is compatible with LPUF-240s and
LPUF-120s, works in LAN or WAN mode, uses SFP+ optical modules, but is not hot-
swappable.
Panel
Figure 1-79
Figure 1-79 FW-12X10G-SFP+
Name
STA (green)
Indicator below the
interface (green)
Interface Attributes
Table 1-85
Table 1-85 FW-12X10G-SFP+ interface attributes
Attribute
Connector type
Issue 03 (2017-12-15)
shows the FW-12X10G-SFP+.
FW-12X10G-SFP+
lists the attributes of interfaces on the FW-12X10G-SFP+.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
l Blinks every 2 seconds (0.5 Hz): The system is working
properly.
l Blinks twice each second (2 Hz): The system is in the alarm
state.
l Steady on: The link is connected.
l Blinking: Data is being transmitted or received.
l Off: The link is disconnected.
Description
LC/PC
1 Hardware Overview
149