Huawei USG9500 Series Hardware Manual page 463

HUAWEI USG9500 Series
Hardware Guide
Figure A-42 Components of a cord end terminal and a power cable
A. Cord end terminal
Procedure
Step 1 Where the cross-section of cable conductor (C) is exposed, strip away a length L1 of
insulation layer (B), as shown in
A-26.
When stripping a power cable, be careful not to damage the cable conductor.
Figure A-43 Stripping a power cable (cord end terminal)
Table A-26 Mapping between the cross-sectional area of the conductor and the value of L1
Cross-
Sectional
Area of
Conductor
(mm
1
1.5
Issue 03 (2017-12-15)
B. Insulation layer of a power cable
NOTICE
Value of L1 (mm)
2
)
8
10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure A-43. Recommended values of L1 are listed in
Cross-Sectional
Area of Conductor
2
(mm )
10
16
A Appendix
C. Power cable conductor
Table
Value of L1 (mm)
15
15
451