Table of Contents
Advertisement
HUAWEI USG9500 Series
Hardware Guide
Indicator/Button
CF ACT indicator
(green)
LINK indicator (green)
(on the Ethernet
interface)
ACT indicator (amber)
(on Ethernet interfaces)
Table 1-53
Table 1-53 MPUD interfaces
Interface Name
Eth0 (10M/100M/1000M
Base-TX auto-sensing)
Console interface
AUX interface
CF card interface
Interface Attributes
Table 1-54
Table 1-54 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes
Attribute
Connector type
Operation mode
Standards compliance
Issue 03 (2017-12-15)
Description
If the indicator is on, the CF is in the correct position.
If the indicator is blinking, data is being read or written.
If the indicator is off, the CF is not in the correct position or
can be removed.
If the indicator is steady on, the link is normal.
If the indicator is off, the link is Down.
If the indicator is blinking, data is being transmitted.
If the indicator is off, no data is being transmitted.
describes the interfaces on the MPUD.
Connector
Type
RJ45
RJ45
RJ45
TYPE II
standard
(compatible
with TYPE I
standard)
lists the attributes of the 10Base-T/100Base-TX/1000Base-T-RJ45 interfaces.
Description
RJ45
10M/100M/1000M auto-sensing interfaces, supporting full-
duplex mode
IEEE 802.3-2002
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Connects to the NMS workstation and has
LINK and ACT indicators.
Connects to the console for on-site
configuration of the system.
Connects to the Modem for remote
maintenance through dialing.
Used to hold a CF card to store data files as
a massive storage device.
1 Hardware Overview
109
Advertisement
Table of Contents
