Table of Contents
Advertisement
HUAWEI USG9500 Series
Hardware Guide
l
Procedure
Step 1 Mark both ends of each power cable using a non-permanent marker.
Step 2 Connect the ends of AC power cables to the input terminals of the AC power chassis. Connect
the other ends of the AC power cables to the AC power supply device.
Step 3 Connect the ends of DC power cables to the PEM modules on USG9560. Connect the other
ends of the DC power cables to the output terminals of the AC power chassis.
Step 4 Use cable ties to bind the cables together at 100 mm intervals, fixing the cables along the
cabling rack from bottom to top.
Step 5 Affix permanent labels 20 mm from both ends of each power cable.
Issue 03 (2017-12-15)
Cable
RTN cable
Terminals
JG2 double-
on DC
hole bare
cables
crimping
from the
terminal (M6)
device to
the AC
power
chassis
AC cables from the AC
power chassis to the AC
power supply device
For details, see
Guide to Power Distribution Design of the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Image
2 Hardware Installation
USG9560.
282
Advertisement
Table of Contents
