Table of Contents
Advertisement
HUAWEI USG9500 Series
Hardware Guide
l
l
Procedure
Step 1 Mark both ends of each power cable using a non-permanent marker.
Step 2 Connect the M6 JG2 terminals of the DC power cable to the PEMs on the USG9560. Connect
the M8 OT terminals of the DC power cable to the output terminals on the power supply
device.
Step 3 Use cable ties to bind the cables together at 100 mm intervals, fixing the cables along the
cabling rack from bottom to top.
Issue 03 (2017-12-15)
Cable
NEG cable
RTN cable
DC cable terminals
Terminal
OT bare crimping
terminal
JG2 double-hole
bare crimping
terminal
For details, see
Guide to Power Distribution Design of the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Image
Image
2 Hardware Installation
USG9560.
279
Advertisement
Table of Contents
