Table of Contents
Advertisement
HUAWEI USG9500 Series
Hardware Guide
Name
Console interface
AUX interface
Others
CLK
TOD
Interface Attributes
Table 1-48
Table 1-48 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes
Attribute
Connector type
Operation mode
Standards compliance
Cable specification
Table 1-49
Table 1-49 Console interface attributes
Attribute
Connector type
Operation mode
Electrical attribute
Baud rate
Data equipment type
Cable specification
Issue 03 (2017-12-15)
Description
It connects to the console for on-site configuration of the
system.
It connects to the Modem for remote maintenance through
dialing.
They are reserved to input or output clock signals.
lists the attributes of the 10Base-T/100Base-TX/1000Base-T-RJ45 interfaces.
Description
RJ45
10M/100M/1000M auto-sensing interfaces, supporting full-
duplex mode
IEEE 802.3-2002
Category 5 unshielded twisted pair (UTP) cables recommended
when the interface rate is 10 Mbit/s or 100 Mbit/s; super
category 5 Shielded Twisted Pair (STP) cables recommended
when the interface rate is 1000 Mbit/s
lists the console interface attributes.
Description
RJ45
Duplex Universal Asynchronous Receiver/Transmitter (UART)
RS-232
9600 bit/s (default value), which can be changed as required
Data Circuit-terminating Equipment (DCE)
8-core shielded cable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Hardware Overview
106
Advertisement
Table of Contents
