Huawei USG9500 Series Hardware Manual page 436

HUAWEI USG9500 Series
Hardware Guide
Figure A-9 NEG(-)
Figure A-10 RTN (+)
DC cable terminals vary based on the device. Two commonly used terminals are the OT bare
crimping terminal and the JG2 double-hole bare crimping terminal.
Bare crimping terminals must be crimped on both ends of the power cable.
Figure A-11
Figure A-11 OT bare crimping terminal
Figure A-12
Figure A-12 JG2 double-hole bare crimping terminal
Issue 03 (2017-12-15)
shows the OT bare crimping terminal without a cable.
shows the JG2 double-hole bare crimping terminal without a cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
A Appendix
424