Unpacking The Carton - Huawei USG9500 Series Hardware Manual

HUAWEI USG9500 Series
Hardware Guide
Step 6 Stand the cabinet upright. Remove the pallet, foam plates, and package bag.
Three to five peoples are required to stand the cabinet up. If the cabinet tips over, injuries may
occur.
Step 7 Check the following items:
l
l
l
l
----End

2.1.4.3 Unpacking the Carton

Cartons contain cables, boards, and terminal devices.
Procedure
Step 1 Read the carton label carefully to understand the types and quantities of the boards in the
carton.
Step 2 Cut off packing straps with diagonal pliers.
Step 3 Cut the tape along the seams of the carton cover with a paper knife. Do not penetrate the
carton with the knife more than is necessary as this may damage the carton contents.
Issue 03 (2017-12-15)
NOTICE
The appearance of the cabinet. Ensure that the exterior (especially the bottom) of the
cabinet is intact, free from water penetration, distortion, and rust.
The cabinet door. Ensure that the cabinet door can be opened and closed normally.
The cabinet surface. Ensure that the cabinet surface is clean, neat, and completely
painted.
The labels on the cabinet. Ensure that the labels on the cabinet are correct, legible, and
complete.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Hardware Installation
236