Huawei USG9500 Series Hardware Manual page 439

HUAWEI USG9500 Series
Hardware Guide
Figure A-13 Fixed-length electric and electronic cable
An electric and electronic cable consists of a cable and two terminals. The terminals are
mainly OT bare crimp terminals.
Figure A-14
Figure A-14 OT bare crimping terminal
Cables Between the AC power chassis and the AC Power Distribution cabinet
If the power supply distance is longer than 50 m, you must place the power distribution
cabinet closer to the AC power chassis.
If the distance between an AC power chassis and the power distribution cabinet is shorter than
50 m, use the AC power cable shown in
Table A-11 Cable types and cable terminals of the AC-input power cable
Item
Cable Type
Terminal
Issue 03 (2017-12-15)
shows the OT bare crimping terminal without a cable.
Description
Two-wire
Power Cable,300/500V,60227 IEC 10(BVV),6mm
AC power
Jacket(Cores:Blue,Brown),43A,2 Equivalent Cores
cable
AC power
Naked Crimping Terminal,OT,6mm
chassis
Ring Terminal,12~10AWG,yellow
DC power
Naked Crimping Terminal,OT,6mm
distribution
Ring Terminal,12~10AWG,yellow
cabinet
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table A-11.
A Appendix
2
,Black
2
,M6,Tin Plating,Insulated
2
,M8,Tin Plating,Insulated
427