Table of Contents
Advertisement
HUAWEI USG9500 Series
Hardware Guide
Name
CLK/Serial
Interface Attributes
Table 1-38
Table 1-38 1000MBase-X-SFP interface attributes
Attribute
Connector type
Operation mode
Standards compliance
Cable specification
Table 1-39
Table 1-39 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes
Attribute
Connector type
Operation mode
Standards compliance
Cable specification
Table 1-40
Table 1-40 Console interface attributes
Attribute
Connector type
Operation mode
Electrical attribute
Issue 03 (2017-12-15)
Description
lists the 1000MBase-X-SFP interface attributes.
Description
SFP
1000M fiber
IEEE 802.3-2002
Single-mode or multi-mode fibers
lists the attributes of the 10Base-T/100Base-TX/1000Base-T-RJ45 interfaces.
Description
RJ45
10M/100M/1000M auto-sensing interfaces, supporting full-
duplex mode
IEEE 802.3-2002
Category 5 unshielded twisted pair (UTP) cables recommended
when the interface rate is 10 Mbit/s or 100 Mbit/s; super
category 5 Shielded Twisted Pair (STP) cables recommended
when the interface rate is 1000 Mbit/s
lists the console interface attributes.
Description
RJ45
Duplex Universal Asynchronous Receiver/Transmitter (UART)
RS-232
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Hardware Overview
99
Advertisement
Table of Contents
