Table of Contents
Advertisement
HUAWEI USG9500 Series
Hardware Guide
l
Issue 03 (2017-12-15)
Figure 2-14 Installing air filters on the upper and lower air intake frames
Install the front cable rack.
NOTE
The front cable rack is divided into upper and lower cable racks. "HUAWEI" is written on the
upper cable rack, while "USG9500 Series" appears on the lower cable rack.
a.
Align the studs of the cable rack with the holes on the front panel of the device and
insert the rack.
b.
Push the upper rack upward until it clicks into place.
c.
Push the lower downward until it clicks into place.
d.
Use ten M4 screws to fasten the cable rack into place.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Hardware Installation
248
Advertisement
Table of Contents
