Table of Contents
Advertisement
HUAWEI USG9500 Series
Hardware Guide
Name
STA (green)
Indicator below the
interface (green)
Interface Attributes
Table 1-100
Table 1-100 FW-6X10G-SFP+ interface attributes
Attribute
Connector type
Optical interface attribute
Working mode
Frame format
Network protocol
Technical Specifications
Table 1-101
Issue 03 (2017-12-15)
Description
l Blinks every 2 seconds (0.5 Hz): The system is working
properly.
l Blinks twice each second (2 Hz): The system is in the alarm
state.
l Steady on: The link is connected.
l Blinking: Data is being transmitted or received.
l Off: The link is disconnected.
lists the attributes of interfaces on the FW-6X10G-SFP+.
Description
LC/PC
Compliant with the selected SFP+ optical module.
For details about the optional attributes of the optical module,
see:
l
1.5.1 1 Gbit/s Electrical Transceiver
l
1.5.2 1.25 Gbit/s SFP/eSFP Optical Module
l
1.5.4 10 Gbit/s SFP+ Optical Module
NOTICE
The optical interface of the 10GBase LAN/WAN-SFP+ FPIC
supports
Gbit/s SFP/eSFP Optical Module
versions. To use
1.25 Gbit/s SFP/eSFP Optical Module
need to upgrade the software version.
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
lists the technical specifications of the FW-6X10G-SFP+.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1.5.1 1 Gbit/s Electrical Transceiver
in V500R001C60 and later
1.5.1 1 Gbit/s Electrical Transceiver
1 Hardware Overview
and
1.5.2 1.25
and
1.5.2
in earlier versions, you
163
Advertisement
Table of Contents
