18.1.10.
Playing back data
Clicking
the following buttons
played back along the time axis while the cursor is moved automatically.
Clicking the [Playback] button moves the cursor along the time axis.
Clicking the [Rewind] or [Fast Forward] button moves the cursor at [x1] or [x2] speed, respectively. You can select
the speed from [x1]/[x2]/[x10] by clicking the button again.
To stop playback midway, click the [Pause] button.
18.1.11.
Save Data/Log Setting
Clicking
the
[Save Data] (
acquired up to that point in time can be saved in CSV file format.
The newest data can be written out to a log file at a set time interval. Clicking the [Log Setting] (
the [Oscillograph] tab -> [Data File] group on the ribbon,
operation dialog of the displayed log file.
Interval Log] drop-down list.
18-403
in the [Oscillograph] tab -> [Playing Back Data] group on the ribbon, data can be
Figure 18-14 Data Playback Buttons
Rewind (x1)
Figure 18-15 Data Playback States on Oscillograph
)
button
in the [Oscillograph] tab -> [Data File] group on the ribbon, the data
The time interval written in a log file is specified in the [Select the
Figure 18-16 Log file operation
Fast Forward (x10)
select the [Log the Measurement Data] check box in the
) button in
18-403