Step 5. Travel Axis; Step 6. Robot Additional Axis - Mitsubishi Electric MELFA FR CR800 Series User Manual

8.9.5. Step 5. Travel axis

Set the travel base to be displayed in the 3D monitor. For details, refer to "9.2.6 Travel base setting for display".
Figure 8-16 Add Project Screen (Step 5. Travel axis)

8.9.6. Step 6. Robot Additional Axis

Sets how to use the additional axis. For details, refer to "13.3.9 Robot additional axis parameter".
Figure 8-17 Add Project Screen (Step 6. Robot Additional Axis)
8-81 8-81