17.11. Open the error record form backup data
Click the right mouse button on the backup data and click "Error record" from the menu to open the error record
of backup data. Display the error record up to the point when the backup was created.
This function is available only for "All" backup data of CR800 series robot controller. For details, refer to
"14.2.6.4Record information".
The software version of the controller that can use the error record function is as follows. Error record can not be
displayed form all backup data acquired by controller other than the version below.
CR800-D/CR800-R/CR800-Q
17-388
Figure 17-21 Event history
Figure 17-22 Event record
Controller
CR750-D/CRnD-700
CR750-Q/CRnQ-700
Software Version
All
Ver.S1j or later
Ver.R1j or later
17-388