Mitsubishi Electric MELFA FR CR800 Series User Manual page 164

[Position Variable] group from the ribbon.
(4) Fine adjust the coordinate to be moved. By click the [Offset Reset] button, you can return the input value of
the offset to 0.
(5) Select the interpolation movement. (MOV: Joint interpolation movement, MVS: Linear interpolation
movement, Direct movement (only for simulation))
(6) Click the [Move] button.
(7) If moving the actual robot, a warning message is displayed. If moving the robot in a simulation, it is moved
without a warning message.
11-164 11-164