Ribbon; Selecting The Tab - Mitsubishi Electric MELFA FR CR800 Series User Manual

6. Ribbon

The ribbon is displayed at the top of the RT ToolBox3 screen.
The various operations of RT ToolBox3 can be performed by selecting the commands provided on the ribbon.

6.1. Selecting the Tab

The ribbon is divided into tabs which each correspond to a specific command. Clicking the desired tab displays a list
of commands registered to that tab.
The following tabs are provided on the ribbon.
Tab Name
Workspace This differs from other tabs in that a drop-down menu appears when it is clicked.
Various operations can be performed by selecting the desired item from the drop-down
menu.
Home Editing operations can be performed on workspaces and projects and the RT ToolBox3
mode can be changed.
When a screen that supports printing functions is active, the print command can be
used.
Online The RT ToolBox3 mode can be changed, and operation commands in the online and
simulator modes are available.
View RT ToolBox3 view related settings can be performed.
Settings for displaying docking windows such as the project tree and window layout
commands for the currently displayed screen are available.
Select this tab also when changing the RT ToolBox3 display language.
3D View Commands for performing settings and operations relating to 3D monitor functions are
available.
For an explanation of 3D monitor functions, refer to "21 3D Monitor".
File This is used for file reading, saving and performing other operations in program editing
and in the spline editing functions.
This tab is displayed only when the screen for a related function is active.
Edit Operation commands for editing file contents are available in program editing and in the
spline editing functions.
This tab is displayed only when the screen for a related function is active.
Tool Commands for displaying simple tool screens used in program editing and in the spline
editing functions are available.
This tab is displayed only when the screen for a related function is active.
Parameter This tab is displayed only when the parameter list screen given in "13.1 Editing from
parameter list" is active.
Commands for searching the text strings of parameter names in the parameter list
screen are available.
Monitor This tab is displayed only when the one of the monitor screens given in "14 Status
Monitoring" is active.
Commands for selecting monitoring "Start/Stop" are available.
Oscillograph This tab is displayed only when the oscillograph screen given in "18.1 Oscillograph" is
active.
Commands for
MELFA-Works Only when the screen related to the MELFA-Works is in the active state, this tab is
displayed.
In this tab, there are the commands for using each function for the MELFA-Works are
prepared.
6-63
Figure 6-1 RT ToolBox3 Ribbon
Table 6-1 Operations Available on Each Tab on the Ribbon
operations such as recording and data playback
Description
are available.
6-63