Table of Contents
Advertisement
The following describes the details that are set in each of the pages of the Add Project screen.
8.9.1. Step 1. Outline
Set the project name. Any optional comments can be set to projects.
Figure 8-12 Add Project Screen (Step 1. Outline)
8.9.2. Step 2. Robot model
Select the robot model and series of robot controller to be used in the project.
You can narrow down candidate models by selecting "Type" and "Maximum load".
Figure 8-13 Add Project Screen (Step 2. Robot model)
8-79
8-79
Advertisement
Table of Contents
