Creating A New Workspace - Mitsubishi Electric MELFA FR CR800 Series User Manual

8.2. Creating a New Workspace

Click the [Workspace] tab -> [New] button or click the [Home] tab -> [Workspace] group -> [New] button on the
ribbon. The New Workspace screen is displayed. Input the workspace name and title, and then click the [OK] button.
The Edit Project screen is displayed, so set the project name (as desired), the communication method, and the robot
model for offline (both are the information of the robot that you want to connect.), then click the [OK] button.
You can change the robot model of 3D monitor to a simple model. Please refer to "21.13 Types of Robot Model"
for the content of the simple model.
Figure 8-3 Creating a New Workspace
The project tree is displayed in the workspace and the "RC1" project is created as the default value.
This project name can be changed later. For details, see "8.12 Editing Projects".
If you want to display a simple model for the robot model in the 3D monitor, check the checkbox of the same label.
Caution
Workspace names
Workspace names are used as folder names in Windows, so you cannot use characters that
cannot be used in Windows folder names (\ /: *? " < > | ).
8-73 8-73