Set / Release Read Protection - Mitsubishi Electric MELFA FR CR800 Series User Manual

11.12. Set / Release read protection

If you set read protection in the robot program, you can make sure a third party can't read it easily. This function
is available in controller software Ver.R5n/S5n or later of CR750-D/Q and CRnD/Q-700 series and all controller
software versions of CR800D/R/Q series.
is displayed on the project tree on programs set with read protection. If you set read protection, you can
restrict the following operations.
- Opening a program (You can restrict the viewing or modification of the program content)
- Starting debug of a program
- Copy / Move / Delete / Rename / Compare a program
If you set / release reading protection of a program, use the program management screen with reference to
"11.13.6 Protect settings" or select [Set / Release reading protection] on the project tree.
Figure 11-78 Set / Release reading protection operation on the project tree
11-180 11-180