Mitsubishi Electric MELFA FR CR800 Series User Manual page 575

Click the [3D view] tab -> [Layout file] group -> [Layout file manager] button on the ribbon. The "Layout file
manager" screen is displayed.
In the layout file list in this screen, select the layout file, and check the content of the layout information in the 3D
display. When you have finished checking, click the [Load] button.
The layout file selected in the layout file list will be loaded.
This method is recommended when files cannot be distinguished purely by file name since both the file name
and the content of the layout information can be checked in the 3D display.
(1) Click the [3D view] tab → [Layout file] group →
[Layout file manager] button on the ribbon.
(2) In the layout file list, select the layout file, and
check the content in the 3D display.
(3) If you check and find the layout file to load, click the
[Load] button.
(4) The layout file selected in the layout file list will be
loaded.
21-575
Figure 21-101 Loading Layout Files by the Layout File Manager
21-575