25. MELFA-Works
You can be used the function of 3D robot simulator "MELFA-Works".
This function can only be used with the Pro edition.
When "RT ToolBox 3" Pro version is started and set to simulation mode, the item of "MELFA - Works" is displayed
in the project tree. Clicking [MELFA - Works] -> [Start] in the project tree starts the MELFA - Works function as an
add - in for Solid Works.
Figure 25-1
Start of MELFA-Works function
For details, refer to the "MELFA-Works Instruction Manual".
25-626
25-626