Mitsubishi Electric MELFA FR CR800 Series User Manual page 148

11.7.4.5. Pasting Position Variables
Pastes the copied position variable.
Activate the program to paste the position variable to, and click the [Edit] tab -> [Position variable] group -> [Paste]
button on the ribbon.
The copied position variable is inserted in the designated program.
At this time, if there is already position data with the same name in that program, a confirmation message is
displayed.
11.7.4.6. Find
This searches for the specified character string.
Click the [Edit] tab -> [Find/Replace] group -> [Find] button on the ribbon. The find screen is displayed.
Input the character string to find, and then click [Find Next] or [Find Previous]. The character string search starts.
Clicking [Display List] searches for all designated character strings in the program and displays them as a list in the
Find window.
Date that search was
executed
Program name
Position variable name that contains the character string to search
You can jump to a line containing the selected content by double-clicking the content from the list display in the Find
window.
11-148
Figure 11-39 Paste Position Data Confirmation Message
Figure 11-40 Find Screen
Number of command lines that contain
Character string to
the character string to search
search
Project name
Figure 11-41 Find Results List Display
Jump by double-clicking
Program location (robot controller/PC)
Line content
11-148