Mitsubishi Electric MELFA FR CR800 Series User Manual page 104

NET/10(H), CC IE through CPU Unit – CCLink Other Station Access) Detailed Settings
"(5) Network communication route setting of MNET/10" and "(6) Coexistence network route setting of C24" may not
be settable depending on the network route selected.
GOT (Ethernet) transparent mode, display the setup screen by clicking the "Setting" button, and set the
communication items.
Caution
CR800-R series controller has some communication paths that are not
supported.
CR800-R does not support the communication routes from "27.
access via G4" to "41.
access" in Table 9-6. Please use other route for communication.
9-104
Figure 9-7 RS-232 (Serial Communication
Serial communication Ethernet via NET/10(H), CC IE remote - CC-Link other station
Serial communication CC-Link other station
9-104