Mitsubishi Electric MELFA FR CR800 Series User Manual page 252

13.6.2.2. Device & Line
You can set the parameters related to devices and lines in the robot controller.
Figure 13-64 Ethernet parameter – Device & line
Select the device to edit and click the [Set] button. The "Device parameter setting" screen is displayed.
Figure 13-65 Ethernet parameter – Device parameter setting
If you select the [MELFA-3D Vision] or [Network Vision Sensor (2D)] item from the [Autoconfiguration] combobox,
the contents of the screen take on the value corresponding to the selected item.
13-252 13-252