Change Of The Operation Mode After Adding The Project - Mitsubishi Electric MELFA FR CR800 Series User Manual

8.11. Change of the operation mode after adding the project

After completed adding the project, a message of confirm about change the operation mode is displayed.
By click the [Online] button or [Simulation] button, you can change the operation mode in the RT ToolBox3.
If you don't want to change the operation mode, please click the [Cancel] button.
Figure 8-22 message of confirm about change the operation mode
If you don't want to display the message, you can set in the option screen below. To display the option screen, you
will select the [Option] in [Workspace] tab from the ribbon.
When [General] category -> [Project Editing] -> [Switch the Operation Mode] is unchecked, the message of confirm
will not be displayed after adding projects.
Figure 8-23 Display setting about the confirm change of operation mode
8-85 8-85