Terumo Advanced Perfusion System 1 Operator's Manual page 126

Central Control Monitor
Master Roller Pump
If the pump type selected for the pump being added was a master roller pump, a
follower roller pump must be selected. The master/follower operation always involves
two roller pumps operating in tandem. The follower pump demand flow rate is defined
as a percentage of the master pump flow rate. If the master pump is operating in
RPM mode, control is an RPM ratio, instead of flow.
Select Pump Type:
Large Roller Pump
Small Roller Pump
Large Master Roller Pump
Small Master Roller Pump
Centrifugal Pump
Select a pump type, name, and color for the follower pump.
To Specify Follower Pump:
Select Follower Pump Type:
Large Follower Roller Pump
Small Follower Roller Pump
The master/follower pumps will appear linked together in one box in the graphical display.
Blood
L/min
START
Select Pump Color
Select Pump Name:
Cryst
Select From List:
ART
CPG
CPG1
CPG2
Vent
Vent1
Vent2
Or Enter New Name:
Enter New Name >
< Previous Next >
Cryst
0
L/min Total
4-62
Available: Assigned:
No
Selection
Arterial
Blood
Vent
Sucker1
Sucker2
Cancel