Finisher/Saddle Finisher Error Codes; Error Code In Detail (Finisher, Puncher) - Canon iR4570 Series Service Manual

15.6 Finisher/Saddle Finisher Error Codes

15.6.1 Error Code in Detail (finisher, puncher)

iR2270 / iR2870 / iR3570 / iR4570
Code
E500
E503
E505
Detail Name
code
0001 fault in
communicatio
n with the
finisher
(common
among all
finishers)
0002
fault in
communicatio
n with the
finisher
0003
(Finisher-Q3/
Q4)
0001
fault in the
backup
memory of the
finisher
(common
among all
finishers)
0002
T-15-16
Detection Remedy
Replace the finisher
controller PCB.
Replace the DC
controller PCB.
fault in Replace the finisher
communicatio controller PCB.
n between Replace the saddle
finisher and controller PCB. Check
saddle unit the cable.
fault in Replace the finisher
communicatio controller PCB.
n between Replace the punch
finisher and drive PCB. Check the
punch unit cable.
Turn off the main
power. Check the
wiring of the DC
fault in the
controller PCB and the
data stored in
finisher controller, and
backup
check the fuse of the
memory
24-V power supply.
Thereafter, turn the
main power back on.
fault in the Replace the punch
EEPROM data driver PCB. Replace
of the punch the finisher controller
unit PCB.
Chapter 15
0008-1518
15-47