Shadow Settings - Sony MVS-6520 User Manual

No. Parameter
2 Left
3 Right
4 Bottom
5 Rotation
The part of the image defined by Top, Left, Right, and
Bottom is magnified or shrunk to fit into Side V or
Side H.
To invert the image in a side face
For example, to invert the image on the front of Side H in
the <Side H Front> group, press the following buttons,
turning them on.
Invert H: To invert horizontally.
Invert V: To invert vertically.
For the images on the other faces, use a similar operation
in the following groups:
• Back image of Side H: <Side H Back> group
• Front image of Side V: <Side V Front> group
• Back image of Side V: <Side V Back> group
Actual size,
upper left
corner
Crop

Shadow Settings

The effect uses two successive channels.
You can adjust the position and density of the shadow with
respect to the image, and the color of the shadow.
The channel with the largest number (for example, Ch2 in
the case of Ch1 and Ch2) becomes the shadow.
Notes
When the Combiner function is off, the shadow effect
cannot be used.
224
Global Effect Operations
Adjustment
Crop position on left side
Crop position on right side
Crop position on bottom side
Angle of rotation, when rotated
around the Z-axis of the source
space
Magnified or
Top side
shrunk to fit
Side H
Side V
Set automatically
Compress
Cropped region
Applying the Drop Shadow effect
Depending on the selected combiner channels, the valid
buttons differ as follows.
For the MKS-6570
Combiner Button
channel
Ch1 Ch5
selection
Shadow Shadow
Ch1+Ch2 Enabled
For the MVE-8000A or MVE-9000
Combiner Button
channel
Ch1 Ch5
selection
Shadow Shadow
Ch5+Ch6 Enabled
Ch6+Ch7
Ch5+Ch6 Enabled
+Ch7
Ch6+Ch7 Enabled Enabled
+Ch8
Ch5+Ch6 Enabled Enabled Enabled
+Ch7
+Ch8
Taking Ch1 Shadow as an example, the following explains
the procedure for applying the Drop Shadow effect.
1
Open the Global Effect >Ch1-Ch2 >Shadow menu
(4213).
2
Press [Ch1 Shadow], turning it on.
The Drop Shadow effect is enabled, and channel 2
becomes the channel for the shadow to the image.
You can adjust the position and density of the shadow.
Notes
The flex shadow function
enabled when Drop Shadow is enabled.
3
Adjust the following parameters.
No. Parameter Adjustment
1 Position H Horizontal shadow position
2 Position V Vertical shadow position
3 Density Density of shadow
4
In the <Ch1 Shadow Source> group, select the shadow
source signal.
Video: Select Ch2 video input as the shadow.
Flat Color: Select a matte color as the shadow.
Ch5+ Ch6+
Ch6
Shadow Ch6 Ch7
Shadow Shadow
Ch5+ Ch6+
Ch6
Shadow Ch6 Ch7
Shadow Shadow
Enabled
Enabled
Enabled
(1 p. 178) cannot be