Flex Shadow Settings - Sony MVS-8000X SystemMVS-7000X System User Manual

Determined by the value of
Angle (see step 3).
Setting art edge colors
1
In the Art Edge menu, turn on the button (Color 1 to
Color 3) for the color for which you want to make
settings in the <Color Adjust> group.
2
Adjust the following parameters.
Color 1 settings
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation
3 Hue
Color 2 settings
Notes
Color 2 cannot be set when [Flat Color] is selected in
the <Art Edge Source> group.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation
3 Hue Offset Hue range
Color 3 settings
Notes
Color 3 can be set only when [Rainbow Gradation] is
selected in the <Art Edge Source> group.
296
Applying Special Effects (Edge Effects)
Position determined
by H and V values
(When Angle (see
step 3) is 0.)
Border
Setting values
0.00 to 100.00
Saturation 0.00 to 100.00
Hue 359.99 to 0.00
Setting values
0.00 to 100.00
Saturation 0.00 to 100.00
–540.0 to +540.0
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Offset Hue range
Relationship between Hue and Hue Offset
For example, when the Hue value of Color 1 is 180.00,
and the Hue Offset value of Color 2 is –540.00, the
relationship is as shown below, with the hue changing
within the Hue Offset range of Color 1 and Color 2.
Hue
Offset
setting
range
Rounding art edge corners
Press [Round Corner], turning it on.
The art edge corners on the inner and outer sides are
rounded.
Notes
This function is available only when [Soft] is on.

Flex Shadow Settings

Notes
• The Flex Shadow function is not supported on the MVE-
8000A.
• On the MKS-7470X/7471X, the Flex Shadow function
can be used except for the following.
- [External] in the Flex Shadow Source group
- [Ext Video] in the Flex Shadow Fill group
• "Mix Color" or "Ext Video" can only be applied to one
of the background (see page 344), flex shadow, trail (see
page 331), and wind (see page 335) effects.
If you select "Mix Color" or "Ext Video" in one of these
settings, a selection of "Mix Color" or "Ext Video" in
any of the other effects is disabled, and "Flat Color" is
selected in its place.
• When executing combining four channels of DME
images, "Mix Color" and "Ext Video" in the flex shadow
and background effects cannot be selected.
Setting values
0.00 to 100.00
0.00 to 100.00
–540.0 to +540.0
Hue
setting
range