Flex Shadow Settings - Sony XVS Series User Manual

Rounding art edge corners
In the Art Edge menu (4114), press [Round Corner],
turning it on.
The art edge corners on the inner and outer sides are
rounded.
Note
This function is only enabled when [Soft] is selected.

Flex Shadow Settings

Notes
• When the signal format is 1080P, the following flex
shadow functions cannot be used.
- [External] in the <Flex Shadow Source> group
- [Ext Video] in the <Flex Shadow Fill> group
• [Mix Color] or [Ext Video] can only be applied to one of
the background (see page 250), flex shadow, trail (see
page 240), and wind (see page 243) effects. If [Mix
Color] or [Ext Video] is selected for one of these effects,
the [Mix Color] or [Ext Video] for the other effects is
disabled, and [Flat Color] is selected in its place.
• When executing a 4-channel combination, the [Mix
Color] and [Ext Video] for flex shadow and background
effects cannot be selected.
Applying a flex shadow effect
1
Open the DME >Edge >Flex Shadow menu (4115).
2
Press [Flex Shadow], turning it on.
Note
The flex shadow function cannot be enabled when the
following functions are enabled.
• All nonlinear effects
• Brick and shadow global effects
3
Set the following parameters.
No. Parameter Adjustment
1 H Move shadow horizontally
2 V Move shadow vertically
3 Size All Enlarge or shrink horizontally and
vertically
a)
4 Soft Softness of shadow
5 Density Density of shadow
a) The Soft parameter is valid only when [Internal] is selected in the
<Flex Shadow Source> group.
4
In the <Flex Shadow Source> group, select the signal
to use for the flex shadow.
External: Generate using an input key signal.
Internal: Generate using a full-size key signal.
5
In the <Flex Shadow Fill> group, select the signal for
the flex shadow portion.
Flat Color: Single color
Mix Color: Mix color signal set in the DME >Edge
>Color Mix menu (4117) (see page 219)
Ext Video: External video signal input from Ext In
6
When [Flat Color] is selected in step 5, set the
following parameters.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation
3 Hue
Adjusting the size of the flex shadow
1
In the Flex Shadow menu (4115), press [Size].
2
Set the following parameters.
No. Parameter Adjustment
1 Size H
2 Size V
3 Size All
a)
4 Soft
5 Density
a) The Soft parameter is valid only when [Internal] is selected in the
<Flex Shadow Source> group.
Setting the center point of the flex shadow
1
In the Flex Shadow menu (4115), press [Axis Loc].
2
Set the following parameters.
No. Parameter Adjustment
1 Axis Loc H
2 Axis Loc V
214
Saturation
Hue
Enlarge or shrink horizontally
Enlarge or shrink vertically
Enlarge or shrink horizontally and
vertically
Softness of shadow
Density of shadow
Move the shadow center axis
horizontally
Move the shadow center axis
vertically