Table 21 Command output
Field
QueueType
QueueID
Dst-NodeID
Length
FullTimes
Packet
ipc performance enable
Use ipc performance enable to enable IPC performance statistics.
Use undo ipc performance to disable IPC performance statistics.
Syntax
ipc performance enable { node node-id | self-node } [ channel channel-id ]
undo ipc performance enable [ node node-id | self-node ] [ channel channel-id ]
Default
IPC performance statistics is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
node node-id: Enables IPC performance statistics for the node specified by the node-id argument. The
following matrix shows the value ranges for the node-id argument:
SR6602
0 to 1
self-node: Enables IPC performance statistics for the local node.
channel channel-id: Enables IPC performance statistics for the channel specified by the channel-id
argument.
Description
Queue type:
•
UNICAST—Unicast queue.
•
MULTICAST—Multicast (including broadcast) queue.
•
MIXCAST—Mixcast queue, which can accommodate unicast, multicast,
and broadcast traffic.
Queue number.
Peer node number. If no peer node exists, two hyphens (--) are displayed.
Queue length (number of packets that can be buffered).
Times that the queue is full.
Total number of packets in the queue.
SR6602-X
SR6604/SR6608/SR6616
•
0 to 3 for SR6604
•
0 to 5 for SR6608
0 to 2
•
0 to 9 for SR6616
95
SR6604-X/SR6608-X/SR6
616-X
•
0 to 13 for SR6604-X
•
0 to 15 for SR6608-X
•
0 to 19 for SR6616-X