Sflow Source - H3C SR6600 Command Reference Manual
Network management and monitoring command reference
Hide thumbs
Also See for SR6600:
- Command reference manual (248 pages) ,
- Fundamentals configuration manual (184 pages) ,
- Configuration manual (145 pages)
Table of Contents
Advertisement
Related commands
sflow sampling-mode
sflow source
Use sflow source to specify the source IP address of sFlow packets.
Use undo sflow source to remove the specified source IP address.
Syntax
sflow source { ip ip-address | ipv6 ipv6-address } *
undo sflow source { ip | ipv6 } *
Default
No source IP address is specified for sFlow packets.
Views
System view
Default command level
2: System level
Parameters
ip ip-address: Specifies the source IPv4 address of sFlow packets.
ipv6 ipv6-address: Specifies the source IPv6 address of sFlow packets.
Examples
# Specify the source IPv4 address of sFlow packets as 10.0.0.1.
<Sysname> system-view
[Sysname] sflow source ip 10.0.0.1
248
Advertisement
Table of Contents
