process-id: OSPF process ID, in the range 1 to 65535.
•
•
ifauthfail: Interface authentication failure traps.
ifcfgerror: Interface configuration error traps.
•
ifrxbadpkt: Traps for receiving incorrect packets.
•
•
ifstatechange: Interface state change traps.
iftxretransmit: Traps for packet receiving and forwarding events on interfaces.
•
lsdbapproachoverflow: Traps for approaching LSDB overflow.
•
lsdboverflow: LSDB overflow traps.
•
maxagelsa: Traps for LSA max age.
•
•
nbrstatechange: Traps for neighbor state change.
originatelsa: Traps for local LSA generation.
•
vifcfgerror: Traps for virtual interface configuration error.
•
virifauthfail: Traps for virtual interface authentication failure.
•
virifrxbadpkt: Traps for virtual interface receiving error packets.
•
•
virifstatechange: Traps for virtual interface state changes.
viriftxretransmit: Traps for virtual interface receiving and forwarding packets.
•
virnbrstatechange: Traps for neighbor state change of the virtual interface.
•
pim: Enables SNMP traps for the PIM module.
candidatebsrwinelection: Traps for the winning of a candidate-bootstrap router (C-BSR) in
•
bootstrap router (BSR) election.
•
electedbsrlostelection: Traps for losing the BSR election.
interfaceelection: Traps for the election of a new DR or DF on an interface.
•
invalidjoinprune: Traps for receiving invalid join or prune packets.
•
invalidregister: Traps for receiving invalid registration packets.
•
neighborloss: Traps for the lost of a neighbor.
•
•
rpmappingchange: Traps for the change of the current RP-set.
standard: Standard traps.
•
authentication: Enables sending authentication failure traps in the event of authentication failure.
coldstart: Sends coldstart traps when the device restarts.
•
linkdown: Globally enables sending linkDown traps when the link of a port goes down.
•
linkup: Globally enables sending linkUp traps when the link of a port goes up.
•
warmstart: Sends warmstart traps when the SNMP restarts.
•
system: Enables system event (private MIB) traps.
vrrp: Enables traps for the VRRP module.
authfailure: VRRP authentication failure traps.
•
newmaster: VRRP newmaster traps, which are sent when the device becomes the master.
•
Usage guidelines
After you globally enable a trap function for a module, whether the module generates traps also depends
on the configuration of the module. For more information, see the sections for each module.
121