Ip Netstream Export Host - H3C SR6600 Command Reference Manual

Configure source interface, destination IP address, and destination port for export of NetStream
•
data.
Examples
# Set the NetStream aggregation mode as AS, and enter the NetStream AS aggregation view.
<Sysname> system-view
[Sysname] ip netstream aggregation as
[Sysname-ns-aggregation-as]
Related commands
enable
•

ip netstream export host

•
ip netstream export source
•
ip netstream export host
Use ip netstream export host to set the destination address and destination UDP port number for
NetStream data export.
Use undo ip netstream export host to delete the specified or all export addresses that are configured in
the specified view.
Syntax
ip netstream export host ip-address udp-port [ vpn-instance vpn-instance-name ]
undo ip netstream export host [ ip-address [ vpn-instance vpn-instance-name ] ]
Default
No destination address or destination UDP port number is configured in system view or aggregation
view.
Views
System view, NetStream aggregation view
Default command level
3: Manage level
Parameters
ip-address: Specifies a destination IP address for NetStream data export.
udp-port: Specifies a destination UDP port number for NetStream data export, in the range of 0 to
65535.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN that the NetStream data export destination
belongs to. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the
destination is on the public network, do not specify this option.
Usage guidelines
You can configure the same destination address and destination UDP port number in different
aggregation views.
The destination address and destination UDP port number configured in aggregation view takes
precedence over those configured in system view. If no destination address or destination UDP port
number is configured in aggregate view, those configured in system view apply.
173